General Information
 We sell to a large number of clients, in all sorts of businesses, providing a trusted service at competitive prices.
All motors are guaranteed for 12 months, and are delivered complete with factory acceptance tests and standards conformity certificates.
We keep common size motors in stock, and can offer a fast turnaround on larger sizes through our affiliate network.
All motors are free delivery within a fifty mile radius. Outside of this, normal carriage charges apply.
We apply discounts to repeat business clients, and on multiple unit orders.
Please contact us to discuss your requirements today.
Standard Features
- Energy efficient standard motor with premium high-efficiency option
- IP55 enclosure provides protection again dust and water jet
- Robust cobstruction for industrial use
- Vacuum impregnation for better insulation
- Wide range of rated voltage (380V to 415V) - 'Multivoltage'
- Windings made of copper wire enamelled with class H polyester varnish
- Bearings provided by world-class manufacturers
Multivoltage Motors
WEG multivoltage motors are designed to work with voltages in the range 380V -5% to 415V +6% with class B temperature rise (80k). this means that the motors meet most 50Hz supplies world-wide:
- 220/380V +/-5%
- 230/400V +/-10%
- 240/415V +/-6%
These motors are also suitable to operate at 60Hz (460V +/-10%), with modified performance data. Other design voltages and special performance characteristics are available on request.
Thermal Protection
The following motor protections are available:
- Motor protection with PTC thermistor sensors in the stator winding (1 or 2 per phase)
- Thermostats with normally open or normally closed contacts in the stator winding
- RTD (type PT100) for monitoring the winding or bearing temperature
|
|
|
Standard Motors | Explosion proof | ODP IP23 motors
WEG are one of the worlds top motor manufactures. They are renouned for the production of quality electrical motor drives, industrial automation equipment, power and distribution transformers, industrial paints, electro-insulating varnishes and resins.
As the North West UK main distribution and service agents for WEG products, we can provide immediate delivery from stock, and complete customer service, all backed up by a truly international company
The following is just a small selection from our extensive range!
 |
Options
- Cable glands
- Roller bearings on drive end
- Taconite labyrinth seal
- Second shaft end
- Drip cover (canopy) for shaft down applications
- Additional terminal box
- Flanges
- Regreasing system for frames 160 up to 200
- Special painting plan for aggressive environments
- Space heaters
- Thermistors up to frame 200
- Thermostats or PT100
- Class “H” insulation
- Special electrical and mechanical characteristics on request
|
Standard Motors
Main Features
- Three-phase, 50 Hz
- Output: 0.12upto315kW (0.16 up to 425 HP)
- Frame sizes 63 up to 355
- Cast iron construction
- Squirrel cage rotor/Aluminium die cast Class “F’ insulation Temperature rise:
- -Class”B” (80K)-S.F.1.0
- -Class”F” (100K)-S.F.1.15
- Continuous duty - S1
- 1000 m.a.s.l.
- Ambient temperature 400C
- Regreasing system from frame 225 S/M and above
- Drain holes with plugs
- Thermistors (1 per phase) fitted from frame 225 and above
- Finish painting: Synthetic enamel alkyd resin base
- Six leads terminal block
- With V’Ring on both endshields
- Stainless steel nameplate
|
|
Here are typical prices for this range of standard motors
 Call Us - 01744 757070
 Email Us
We also supply a full range of IP56 Marine duty motors, and IP65 Mining Duty Motors in the above range. Please CALL US for the latest prices |
 |
|
Options
- Two-components, epoxy polyamide paint
- Epoxy resin impregnation
- Thermostats, thermistors or RIDs
- Alternative cable entries: RWG, NPT, Metric or GK
- Operation with inverters - T3 temperature class only and fitted with thermistors
- Special electrical and mechanical characteristics on request
|
Explosion Proof Motors
Main Features
- Three-phase, 50 Hz
- Output: 0.37 up to 300kW (0.5 up to 400HP)
- Frame sizes 90 up to 355
- Cast iron construction
- Squirrel cage rotor/Aluminium die cast
- Temperature class: T4
- Class'F' insulation
- Temperature rise class 'B' (80 K)
- Service Factor 1.0
- Continuous duty - S1
- 1000 m.a.s.l.
- Ambient temperature 400C
- Finish painting: Synthetic enamel alkyd resin base
- Six leads terminal block
- Degree of protection: lP55
- Lip Seal in both endshields
- Stainless steel nameplate
|
|
Call Us - 01744 757070
Email Us
Please CALL US for the latest prices |
|
|
Options
- Cable glands
- Class “H” insulation
- Second shaft end
- Thermistors, thermostats or PT100
- Roller bearings on drive end
- 1000 and 750 rpm on request
- Special electrical and mechanical characteristics on request
|
IP23 Motors
Main Features
- Three-phase, 50 Hz
- Output: 11 up to 220kW (15 up to 300 HP)
- Frame sizes 160 up to 280
- Cast iron construction
- Squirrel cage rotor/Aluminium die cast
- Class”F” insulation
- Temperature rise:
- -Class “B’ (80 K)-S.F 1.0
- -Class “F” (100 K)-S.E 1.15
- Continuous duty - S1
- 1000 m.a.s.l.
- Ambient temperature 400C
- Regreasing system from frame 225 and above
- Finish painting: Synthetic enamel alkyd resin base
- Six leads terminal block
|
|
We also supply Totally Enclosed Fan Ventilated motors to IP55
Call Us - 01744 757070
Email Us
Please CALL US for the latest prices |
|
|
|
Products - Electric Motors